One of my favorite things of being a homeowner is having the space to take on BIGGER DIY projects. It’s amazing how much more you can do when you have an actual outdoor space and a garage… say WHAT!

When I moved back to Washington 3 years ago, I was starting over on the furniture front and was trying to keep things on a budget after a big and expensive move too. Queue Pinterest and another one of my favorite things, Facebook Buy Sell Groups and Marketplace! Which feels a smidge safer than Craigslist? I’m sure there are creepers there too but this post isn’t about that! It’s about…. how I snagged a bed frame for $25 and did some DIY furniture magic on it!

Let me back up a few though, this all started because I really loved the look of industrial style bed frames. When I was looking to buy one though the prices started at $300 and went all the way over $1k! Ones similar to these…

Of course, I didn’t want to spend that though… so I spent some time on Pinterest and found some tutorials of people who had spray painted brass bed frames to get the same look. Ding, ding, ding I could totally do that! So I started looking on Facebook Marketplace and I quickly found this beauty for a whopping $25! Which looked like a lot of my friend’s bed frames growing up! Of course there’s nothing wrong with this look if that’s your thing, but for me it was a stepping stone to getting that industrial vibes I was after.

To get the look I wanted, I opted for a flat black spray paint from Krylon. I usually go with the all-in-one spray paints so that I can skip the separate primer coat, which saves some time. If you go with a traditional spray paint can, I also highly recommend getting one of the comfort nozzle too. SO worth the extra little money to save your fingers. Plus you can reuse them for future projects.

Two coats on each side later they turned out like this! Which, in case you’re wondering was 4 cans of spray paint. I wanted to make sure it was covered well.

I’d say I achieved the look I was going for! What do you think? The best part too? I didn’t spend hundreds of dollars… in fact the whole project came in right under $40! Of course, your price will vary a little depending on if you have a bed frame around the house or buy one. Either way, though it’s an inexpensive project that can totally change the look of your bedroom!

Martha Stewart, Michaels, painting and wine... What more do you need?! In celebration of Michael's expansion of its craft paint offerings, they threw an awesome party where we got to check out the new products. Get this too, not only did we get to learn different painting techniques like using stencils, splattering, and using rollers but we also got to paint the event space. Say what?! Oh yeah, as in painting the styled spaces including the bed, tables, canvases, rug and more. Definitely not something you get to do every day!

Needless to say, we had such a BLAST at the event! It was so much checking out the new products and trying out the paints first-hand. All while sipping on some wine from Martha Stewart Wine Co. (more on that over here)! 

We met the sweetest girls from the Atlanta team too who not only taught us how to splatter but also walked us through some of the key features of the new products. I'm certainly no Picasso, but it only took a few brush strokes to see some of the features in action including the quality of the paint. The consistency was much thicker than a lot of paints I've used before so we only needed one coat on our project. Plus it also dried quickly which is always a nice perk! 

The great thing about the expansion of the line too is they offer multi-surface, outdoor, watercolor and weather resistant paints -- so something for everyone. They really took us testing the multi-surface to heart too! Wood, canvas, metal, canvas, and the furniture. You name it, we tried it! I have to say I was really impressed with the application on each too. Now if only I could just start painting everything in my apartment like the event! 😉

If you're looking to get crafty this summer, definitely check out the Martha Stewart line at Michaels. I certainly know I will! Plus they sent us home with some goodies to try out so I'll be getting my DIY on again soon. Be sure to follow me on  Instagram to see what I make! Thanks for a great event Martha Stewart and Michaels!

Some photos courtesy of Getty & Michaels PR Team

Things are about to get a little grout-y with today's DIY post! Get it?! Haha, ok ok maybe it's a little cheesy 😜. As I mentioned in my latest apartment tour blog post, our apartment needed a little TLC when we moved in. When you find an apartment in Manhattan in a great location with a backyard though, you sign that lease and commit to doing some DIY projects.. because #priorities. And let's be honest, when I say DIY projects I'm only referring to myself because while Chris has many great qualities being handy or crafty are not two of them.

Of course when you're renting there's a little bit of a limit to the things you can do. 1.) you don't own the place so you can't do anything too crazy and 2.) since you're just renting you don't want to invest too much into any projects. There are just certain things you have to do something about though and our shower definitely fit that bill. Guys.. it was nasty. Living in New York, you're living in buildings that are often pre-war and have a high turnover of renters so renovations are often few and in between because, well, they'll get rented either way. So unfortunately it's not uncommon to end up with a bathroom with moldy caulking or missing grout. Not to fear though! With a few items under $30 and some elbow grease, you too can make some improvements.

So to kick off this post we're going with some before shots and I'm warning you, they're prettyyyy scary. This is what $2.6k a month gets ya! 😂

Yeah... we definitely had to make some improvements there. So here's the dets on what you need to make some magic happen.

The Essentials for the Job:

1. 3 in 1 Caulk Tool 
2. Elmer's Tile Grout
3. Silicone Caulk
4. Polishing Sponge
5. Plastic Dropcloth (optional)

To get started, first you want to make sure the shower is clean so that you can prep the space. Once it's clean, you'll need to chip away at the old grout to make room for the new and also remove all of the old caulking. I bought this tool and I can honestly say it was the best $5 spent on the project. This little sucker made it super easy to remove everything. Bye bye nastiness!

After everything had been removed, I cleaned up a bit and got ready to re-grout! I opted for a pre-mixed grout in a tube from Elmer's -- who knew they also made bathroom products! 

I had read some great reviews about the product online and it sounded like a less messy option and didn't require as much drying time as some of the others, so I decided to give it a go! It's not as grainy as some other grouts, but it was easy to use and got the job done so those two things were the most important parts to me.

Never grouted before? Yeah, I hadn't either, but there are a ton of Youtube videos out there. While DIYing isn't for everyone, and some things are definitely best left to the pros, this one wasn't too bad. Time-consuming but not too difficult. The video below will give you some of the basics.

The grout dries pretty quickly and then the next step is to damper your polishing sponge to wipe off the excess. The key to this is giving it enough time to dry, but not to leave it on there for too long otherwise it's a pain in the booty to get off. I found about 20 mins was a good amount of time. After I completed the grout process, I let everything sit for 12 hours per the directions. While the supplies I chose allowed for much shorter waiting times, this is definitely a weekend project.

After the grout had sat for 12 hours I moved on to the caulking process. I had used caulking before in past apartments -- clearly I can't handle yucky showers. I will say though, I used a different brand this time and I will never use another again. I highly recommend using this variety from Momentive Performance Materials. Again with the time issue, this brand only requires 3 hours before you can use your shower as opposed to other brands which usually require at least 24 hours. Caulking isn't my favorite thing to do so I definitely wanted to get it right once and not have to do it again because some peeled up because it didn't cure for long enough. This one is also great because you don't need a caulking gun. Just squeeze and go! The tool I used earlier in the project also can be used to smooth our caulking too.

After the caulking was complete, it was time to wait! The directions said 3 hours but I decided to let it sit at least 6 before using the shower. I also bought a plastic dropcloth and taped it up on the shower walls for 2 days.. Justttt to be extra careful to protect the work I just did. #OneBathroomProblems If you have another shower, you probably won't need one but I got one just as a precaution.

So how did it turn out? I'd say pretty good! It's still not perfect, but oh boy is it an improvement from how it was when we moved in!

I hope you've enjoyed this post and hopefully I can help out some fellow people dealing with some grout-y showers! If you have any questions feel free to send them my way in the comments.